Dj.XPro and Dj.Steve
XPro event service
Used market
All items are in a used and functional condition
1x HQ-POWER Qubic 21300
​
very strong performance with very pure sound
- 2 gain controls on the front panel
- All operating modes can be controlled via the LEDs on the front panel
- Input sensitivity adjustable via Switch on the back plate
- Limiter adjustable according to impedance
- Ground lift switch
- Bridge switch
- Protection circuits for optimized Device protection
- 19 "robust housing
- high utilization ratio
Technical specifications
- output power:
Stereo 4 ohms: 2 x 1900W / 4 ohms
.Stereo 8 ohms: 2 x 1300W / 8 ohms
. bridged: 1 x 3800W
- THD: <0.01%
- Frequency range: 20-20000Hz ± 0.5dB
- Damping factor:> 400
- Rate of rise: 60V / µs
- Signal to noise ratio:> 100dB
- Input sensitivity: 0.77V / 26dB / 1.44V
- LED display:
.general: stereo, parallel, bridged
.per channel: Signal, 'clip / limit', 'protect'
- Cooling: 2 x fans
- Loudspeaker connection: Speakon NL4FC + Banana plugs
- Input connector: XLR & 6.35mm- Jack plug
- Power supply: 230VAC / 50Hz
- Dimensions: 19 "x 135mm x 500mm
- Utilization ratio: 48W / kg
- Weight: 40kg
no shipping ... just pick it up or you can organize shipping yourself
2 x JBL Power Performer PS 12
A professional speaker technology introduced by JBL, PS Series Speaker System, which was designed with the use of a wide range of applications in mind. In the low pass fitted with a 30 cm cone type woofer, it has a high region of a highly efficient design to be fitted with a bi-radial horn and fabric tweeter. The case has adopted a wedge shape design. In addition, we have adopted and a large carrying handle, the bundling metal front grille to mark the entering JBL logo.
system
2-way, 2 speaker bass reflex system, and a floor type
Use unit
For low pass: 30 cm cone type
for high regions: horn type (horn + dome)
Allowed input
225W (RMS)
1,000 W (peak)
Frequency characteristic
45Hz ~ 17kHz (-10dB)
Impedance
6Ω
Output sound pressure level
96dB / 1W / 1m
External dimensions
Width 460 x height 710 x depth 390 mm
load
24.3kg
​
​
1x Equalizer Omnitronic PEQ 2150
Features:
• 2 x 15-band equalizers
• Using the range selector switch, the Switch the display from 6 dB to 12 dB
• EQ-In / Out switch for quick comparison of the sound with or without an equalizer
• Lockable middle position of the faders
• The volume can be adjusted using the level control for the left and right side separately to adjust
• LED displays for all important functions
• Inputs and outputs via jack and XLR Sockets
• 19 'rack installation possible
Technical specifications:
• Power supply: 115/230 V AC, 50/60 Hz ~
• Total connected load: 7 W
• Input level: -10 dB (300 mV)
• Input impedance: 22,000 ohms / stereo
• Output level: -10 dB (300 mV)
• Output impedance: 600 ohms / stereo
• Frequency range: 5 - 65,000 Hz (-1.5 dB)
• Signal to noise ratio: 100 dB
• Frequencies: 25/40/63/100/160/250/400/630 Hz / 1k / 1.6k / 2.5k / 4k / 6.3k / 10k / 16 kHz
• Control range: -6 dB to +6 dB
• -12 dB to +12 dB
• Total harmonic distortion: less than 0.01%
• Dimensions: 482 x 53 x 193 mm
• Weight: 3.2 kg
​
Shipping is possible
Behringer Ultradrive Pro DCX2496
​
Digital 24 bit / 96 kHz loudspeaker management system 3 in / 6 out
​
​
3 analog inputs - one can also be used as a digital AES / EBU input for thomann
6 analog outputs
High-end AKM 24 bit / 96 kHz A / D and D / A converter
extensive selection of EQs and delays for every input and output
short delay 11.64 ms max. possible per output
long delay 582.25 ms (= approx. 200 m) possible per output
"Zero" attack limiter
extremely flexible output configurations
individual crossover filter types
Configuration via interface converter possible (optionally available under thomann article number 253016)
Dimensions: 44.5 x 482.6 x 217 mm
Format: 19 "/ 1 U
Weight: 3 kg
​
Power cable + operating instructions in German
​
Shipping is possible
1x Ayra scanner
LED DMX 512 scanner 30W - ALO 030 MKII
Product details
LED scanner
Light source: 1 x 30W white light LED
Color wheel with 8 facets + open white
Gobo with 8 motifs + spot
Gobo scroll effect
PAN and TILT reverse
Display shutdown: The timer switches the display off after x seconds
Stroboscopic function (0-18 Hz)
manually adjustable focus
Gobo shake effect
LED display with setting options
DMX-512, music or master / slave controlled
Beam angle: 13
Power consumption: max.50W
Power supply: AC 230V, 50Hz
Dimensions: 370 x 200 x 150 mm
Weight: 4 kg
DMX channels
Channel 1: PAN
Channel 2: TILT
Channel 3: color wheel (white, orange, blue, green, yellow, pink, light blue, light green, light yellow, rainbow effect)
Channel 4: Gobo wheel (including gobo scroll and gobo shake function
Channel 5: Shutter / strobe function (0-18 Hz)
Channel 6: dimmer (0-100%)
Channel 7: internal motion control
Channel 8: internal macros with regard to operating speed ​
​​
Shipping is possible
1x scanner American Dj
Comscan LED 10W DMX 512
​
Technical specifications:
Compact, portable high performance DMX scanner with high quality LED light source
8 gobos / colors + spot
Gobos and color gobos are on one wheel
DMX-512 protocol (requires 5 DMX channels)
LED display with 4 buttons to control the device
3 operating modes: DMX, master / slave, sound to light
Exciting built-in programs
Pan / Tilt Inversion
Manual focus
Gobo shake effect
Dimming: 0-100%
Strobe effect
Beam angle: 13 °
X / Y mirror movement
Pan: 166 ° (DMX) - 104 ° (sound to light)
Tilt: 54 ° (DMX) - 40 ° (sound to light)
1.8 ° stepper motors with micro stepping
Suspension and safety hooks included
Power consumption: 30W max.
Compatible with the American DJ UC3 series
Continuous operation possible
Extremely long life of the LEDs (~ 30,000 hours)
Switching power supply: AC 100V ~ 240V 50 / 60Hz - IEC socket
Dimensions (LxWxH): 344x160x200mm
Weight: 3.6 kg
​
incl. American DJ UC3 remote control
​
​
​
Shipping is possible
1x Scanner American DJ
X-Scan LED 20W Cree Plus DMX 512
​
Technical specifications:
​
High power scanner with 1x20 watt LED
Longlife CREE LED with a service life of approx. 50,000 hours
Built-in color wheel with 8 colors + white
Built-in gobo wheel with 8 gobos + open
can be operated continuously without a break
Separate gobo and color wheel
6 DMX channels
Digital display with simple menu navigation
Pan / tilt inversion function in master / slave mode (e.g. scanners 1 and 3 run opposite to scanners 2 and 4)
Gobo scroll function
Gobo Shake function
0-100% dimming
Manual focus
Strobe function
Pulse effect
Built-in programs
Sound to light function
Several devices can be operated together and synchronously in master-slave mode
easy control via optional UC-3 hand controller
XLR input and output for DMX or master / slave
Fan cooled
High resolution stepper motors
Power consumption: 44W
Dimensions: 386 x 200 x 150 mm
Weight: 4.4 kg
​
​
​
​
Shipping is possible